Toledo Barrel-Shaped Space Frame Coal Storage Shed in the Philippines

 A magnificent “rainbow” has been woven by the builders and now stands proudly on Philippine soil.

The Toledo Barrel-Shaped Space Frame Coal Storage Shed project in the Philippines, constructed by LFBJMF, has garnered significant attention since its initial planning as a vital energy support facility in the region.

This project serves as a supporting facility for a private power plant, located within the TIPCO Industrial Park in the Philippines, and stands as a key node in the local energy infrastructure development.

The project was strictly manufactured in accordance with Chinese standards, designed for a service life of up to 50 years, and boasts excellent durability and safety. The project’s core parameters are impressive: the coal yard space frame spans 88 meters (44m × 2), with a frame height of 24.05 meters and a foundation height of 11.0 meters. To address the complex local natural environment, the project was designed to high standards, capable of withstanding Category II winds (200 km/h) and Category 4 earthquakes (Z=0.4); For corrosion protection and building envelope, the space frame surface employs hot-dip galvanizing (or zinc spraying) to ensure corrosion resistance, while the roof utilizes colored steel sheets (SMP coating) combined with FRP materials to facilitate natural lighting, balancing practicality with environmental sustainability.

Upon completion, the project has yielded significant results, effectively reducing dust pollution from the coal yard and clearly separating the coal storage area from the main production zone within the power plant, thereby meeting regulatory requirements for “separating clean and contaminated zones.” At the same time, it effectively minimizes coal loss caused by rainwater runoff and high winds, significantly reducing the impact on the plant premises and the surrounding environment. As a critical supporting facility for the on-site power plant, the commissioning of this storage shed will further ensure the plant’s stable operation, help alleviate regional energy supply pressures, and effectively enhance the reliability of industrial power supply and the quality of residential electricity in the local area.

The successful completion of the Toledo Barrel-Shaped Space Frame Coal Storage Shed project in the Philippines not only demonstrates the reliability of Chinese standards in overseas engineering projects but also provides the construction contractor, LFBJMF, with valuable practical experience in overseas projects. It has further refined the company’s overseas project management model, enhanced its capabilities in international project operations, and laid a solid foundation for further penetrating the overseas engineering market and expanding new business growth opportunities.

评论

发表评论

此博客中的热门博文

ROOFING CONSTRUCTION TECHNOLOGY OF SADDLE-SHAPED OVERHANGING STEEL STRUCTURE RETICULATED SHELL SKIRT BUILDING OF HANGZHOU GATE SUPER HIGH-RISE BUILDING

图片
  Hangzhou Century Center, which is the tallest building under construction in Hangzhou and the tallest twin tower building in the Hangzhou Bay area, is known as the gate of Hangzhou. The wings of the two towers of Hangzhou Gate, together with the surrounding Olympic Sports Center, natatorium, International Expo Center, as well as the civic center, international Convention center, and grand Theater on the other side of the Qian River, form a "seven-star bright" urban picture. The Gate of Hangzhou is like a cloud floating in the seven stars, with a strong sense of design and visual impact.   The main body of Hangzhou Gate is composed of symmetrical 63-story east and west towers, with a building height of 302.6m and a total construction area of about 532,500 square meters. The east and west towers are connected by steel arch Bridges on the 1st to 6th floors above ground. The maximum span of the bridge is 85m at the north and south ends, the minimum span is 55m in the middle...
阅读全文

The Development of the Structural Form of Gas Station Canopy

图片
Since Portland cement was invented in 1824, after half a century of research and development, it was not until the middle of the 19th century that concrete structures began to be applied. Because the quality of concrete and cement was relatively poor at that time, and the theory of design technology had not yet started, the development was relatively slow. At the end of the 19th century and the beginning of the 20th century, China began to build buildings with reinforced concrete structures, such as Shamian in Guangzhou and The Bund in Shanghai. However, when our country was first established, the steel output was very low, only 1.35 million tons per year. At that time, the construction of steel structures in China could only rely on the economic and technical assistance of the Soviet Union. It can be seen that the appearance of reinforced concrete structures in China was earlier than steel structures. The structure of the gas station canopy in China was a reinforced concrete frame s...
阅读全文

Prefab aircraft hangar construction

图片
  With the rapid progress of science and technology, the development of aviation and aerospace, the design of aircraft is constantly innovating. The continuous emergence of large aircraft will inevitably lead to the emergence of large-span maintenance depots. According to the current requirements for the clear span of the maintenance warehouse, the span of the maintenance warehouse is basically more than 60m, which is already a large-span structure. In addition, the increase of flight frequency also puts forward higher requirements for the structure and function of airport-supporting facilities such as hangars. The  prefab hangar  has high requirements on the structure of the roof due to its large span, large opening and large lifting capacity of hanging cranes. Because of its outstanding advantages, the grid structure can meet the needs of hangar construction, and has been used in more and more hangar arrays at home and abroad. Due to the special requirements of the...
阅读全文