What to do when space frame processing encounters bad weather



 The space frame processing company will introduce what to do when the space frame processing encounters bad weather. During the space frame processing, it is usually in a sunny weather environment, but there are also times when the weather is bad. How about frame processing? Let's take a look. In case of rain, it is recommended that you set up temporary shelters, and the rain should not fall on the hot welds. Welding parts should be wiped dry with a dry cloth before welding. Large components such as columns and main beams need to be corrected in windy weather during grid processing and fixed after correction to prevent unilateral instability. In addition, when the weather is relatively humid, the storage electrode should be moisture-proof and baked, and the same electrode should not be repeatedly baked more than twice.

In bad weather, the corresponding preparation work is done, and space frame processing can also be carried out to ensure the processing quality. We often encounter a lot of bad weather when we are constructing the grid. In this environment, we cannot stop the construction of the grid because of the unsatisfactory environment. Therefore, we should pay attention to some problems during construction in a lot of rainy weather. How to carry out the construction of the space frame in bad weather. The components cannot be painted in rainy weather. When the project is under construction on rainy days, temporary protective sheds should be set up for the space frame project, and rainwater should not fall on the hot welds.

If the welding part is wet, it must be cleaned with a dry cloth and dried with an oxyacetylene flame before welding to keep the joint dry and no residual moisture. Because the air is relatively humid in rainy days, the welding rod should be stored in moisture-proof and baked. The repeated baking of the same welding rod should not exceed twice, and the management personnel should make a baking record in time. In the event of windy weather during construction, large components such as columns, main beams, supports, etc. should be corrected immediately, and they should be permanently fixed immediately after the correct position is corrected to prevent unilateral instability. The components installed on the same day should form a spatial stability system. Roof insulation construction cannot be carried out on rainy days and strong winds above level 5. 

评论

发表评论

此博客中的热门博文

Several cutting methods of steel structure space frame

图片
  Steel st ructure space frame s are now widely used, such as galvanized steel warehouse , glass dome building , airport hangar ,steel structure warehouses, hall roofs, gymnasiums, etc. The builder will cut, produce, and process according to the customer's requirements. There are many ways to cut steel structure space frame s, which will help you to have more choices of cutting. Then, the space frame   manufacturers below will give us a detailed description of several common cutting methods. The cutting methods of the steel structure space frame   are as follows: 1. Flame cutting by CNC machine tools: that is to say, use oxygen cylinders to oxidize and melt steel at a high temperature continuously. At present, natural gas is generally available, which is relatively reliable. 2. Waterjet cutting machine: Generally, high-pressure flowing water is used for cutting, and the accuracy is very high. It is often cut in some very thin, medium-thick steel that requires precision m...
阅读全文

What are the advantages of steel over traditional concrete?

图片
  steel warehouse Steel structures offer several advantages over traditional concrete structures that cover a wide range of areas, including speed of construction, flexibility, sustainability, and more. Here are some common advantages of steel construction:   Lightweight and High Strength: Steel is a lightweight and strong building material. Compared to concrete, the use of steel reduces the dead weight of the building, which in turn reduces the load on the foundation and lowers the overall weight of the building.   Fast construction: Steel structures can be prefabricated in a factory and then simply assembled on site. In contrast, traditional concrete structures typically require more on-site pouring and maintenance time. As a result, steel structures are often faster to construct, helping to shorten project duration.   Design Flexibility: Steel structures are strong and malleable and can support large spans and diverse building designs. This gives designers more f...
阅读全文

Space frame cost control

图片
  With the continuous improvement of socialist productivity, various industries are developing in the direction of rapid development, so is the steel space frame engineering industry. Due to the Therefore, we should attach great importance to the  space frame cost  management, because the project involves many aspects and fields, and only through reasonable project space frame cost management, can we ensure the quality of the last step of the project. Therefore, we should fully realize that dynamic management and control of project cost is a very important work content and link. In order to improve the quality level of steel grid engineering, dynamic management and control of project cost should be further strengthened. Optimizing the investment process is the most critical link in the steel space frame. the same time, it is also a very important aspect in the process of space frame construction cost management. Therefore, active and effective measures should be take...
阅读全文