The space frame cost
About space frame cost basically has the following factor to decide
“Lightweight”
Light space frame plate, 30% lighter than the traditional reinforced concrete plate, to a great extent to reduce the steel structure of the building itself bearing force, make the lower steel structure with steel greatly saved, the project cost can be reduced by one-third, the space frame cost reduced
“Gao Qiang”
The grid plate adopts the combination structure of a light steel frame and high strength BAS inorganic light core material. Although it is a light space frame plate, it maintains the characteristics of large bearing capacity and high safety degree of traditional reinforced concrete heavy plate. It can not only meet the requirements of uniform load distribution, but also has a strong centralized bearing capacity, so it is the ideal material to replace the traditional concrete roof slab and floor slab.
“Durable”
Material selection and construction of steel space frame plate carefully designed combination, product design service life can reach 50 years; the Core plate is an inorganic material, good stability, anti-aging, service life is equal to concrete material; The diameter of the bottom steel wire is more than 3mm, the thickness of the protective layer is more than 20mm, and the moisture absorption rate is less than 0.1%; The plate has strong resistance to acid, alkali and other gas corrosion. After 25 freezing-thawing cycles, the volume and strength have almost no change.
The more you use, the more you save.
Steel space frame plate in normal use without special maintenance, the use of low cost; Partial damage can be repaired directly on-site, if necessary, can be replaced veneer, does not affect the overall structure.
评论
发表评论