Design of steel structures against corrosion (II)

 Steel Structure Surface Related Design

Anti-corrosion Coating

1. The adhesion between the anti-corrosion coating and steel base should not be lower than 5MPa.

2. For newly designed steel structures, it is not suitable to use rust coating for descaling and painting, and when rust coating is required for repairing the steel structures of existing buildings, it should be used after the demonstration.

3. The fireproof coating on the surface of the steel structure generally does not have an anticorrosive effect, so the fireproof coating should not be used as an anticorrosive coating. The surface of the steel structure should be coated with antirust primer, corrosion-resistant intermediate coating, fireproof coating, and then anticorrosive surface coating according to the structure of protection treatment.

4. Galvanized steel plating amount of micro-corrosive, weak corrosion or corrosive environment in the double-sided galvanized amount should not be less than 180g/m2, 250g/m2, or 280g/m2; hot-dip galvanized steel pipe galvanized layer weight should not be less than the average value of 500g/m2, which shall not be less than 480g/m2 in any of these styles.

5. fasteners hot dip galvanized layer thickness should not be less than 40um local, batch average thickness should not be less than 50μm; and steel components galvanized layer thickness should not be less than 80μm. (1μum = 7.2g/m2)



评论

发表评论

此博客中的热门博文

Several cutting methods of steel structure space frame

图片
  Steel st ructure space frame s are now widely used, such as galvanized steel warehouse , glass dome building , airport hangar ,steel structure warehouses, hall roofs, gymnasiums, etc. The builder will cut, produce, and process according to the customer's requirements. There are many ways to cut steel structure space frame s, which will help you to have more choices of cutting. Then, the space frame   manufacturers below will give us a detailed description of several common cutting methods. The cutting methods of the steel structure space frame   are as follows: 1. Flame cutting by CNC machine tools: that is to say, use oxygen cylinders to oxidize and melt steel at a high temperature continuously. At present, natural gas is generally available, which is relatively reliable. 2. Waterjet cutting machine: Generally, high-pressure flowing water is used for cutting, and the accuracy is very high. It is often cut in some very thin, medium-thick steel that requires precision machining,
阅读全文

What are the advantages of steel over traditional concrete?

图片
  steel warehouse Steel structures offer several advantages over traditional concrete structures that cover a wide range of areas, including speed of construction, flexibility, sustainability, and more. Here are some common advantages of steel construction:   Lightweight and High Strength: Steel is a lightweight and strong building material. Compared to concrete, the use of steel reduces the dead weight of the building, which in turn reduces the load on the foundation and lowers the overall weight of the building.   Fast construction: Steel structures can be prefabricated in a factory and then simply assembled on site. In contrast, traditional concrete structures typically require more on-site pouring and maintenance time. As a result, steel structures are often faster to construct, helping to shorten project duration.   Design Flexibility: Steel structures are strong and malleable and can support large spans and diverse building designs. This gives designers more flexibility in creat
阅读全文

Lifting construction of the starting unit frame of the large-span arched space frame

图片
The space frame structure has good structural performance and a wide range of applications, especially for the installation of long-span steel structures. It has the advantages of saving steel, manufacturing technology, and convenient installation and construction. It is widely used in large-scale power generation facilities, petrochemical, coal f ields and other industries. In the construction of coal yards, in the past, most of the coal yards were piled in the open air, which caused great environmental pollution and affected the normal use of the coal yards. The coal raw material workshops of thermal power plants required relatively large building areas and spans (currently, the domestic span has reached 120m above), so that the steel space frame shell structure is widely used in the raw material dry coal shed workshop. The shell structure of the space frame of the dry coal shed has the characteristics of large span and high vertical height. During the construction process, it is ne
阅读全文