General requirements for coating inspection of steel structure engineering coatings for space frame processing manufacturers


In modern society, people's living standards have been greatly improved, and their tastes are getting higher and higher. There are also certain regulations on the aesthetics of engineering buildings. Therefore, there is more need for engineering to use large-span structures. space frame trusses are one of the most widely used. Forms, such as gymnasium roof, coal storage shed, glass roof building,factory buildings, etc., but in the production process, there will be some problems, such as the use of coatings, and there are certain regulations for commonly used coatings in engineering buildings. The space frame processing manufacturers below will introduce the steel structure for you General regulations for coating inspection of engineering construction coatings.

LFBJMB Contact :mail marketing01@cnxzlf.com、86-516-8595-0258、+86 17751936871

The types, specifications, characteristics, and qualities of raw materials such as steel structure fireproof coatings, paints, paint thinners, and epoxy curing agents shall comply with the current national product implementation standards and design requirements.

Inspection Quantity: Full inspection.

Inspection method: Check the quality certification materials, Chinese labels and test reports of the products.

The anti-rust treatment on the surface of the steel frame structure before painting shall comply with the current standards, relevant laws and regulations and design scheme requirements. The surface of the treated stainless steel plate does not need to have rust, welding tumors, welding slag, oil stains, dust, water and burrs. When there is no stipulation in the design plan, the derusting level of the surface of the steel frame structure shall meet the requirements.

Quantity to be inspected: 10% of the number of prefabricated components shall be sampled and inspected, and the number of similar prefabricated components shall not be less than 3.

Inspection method: check with a gray knife.

Do not apply by mistake or miss-coating, and the coating should be free of peeling and rust.

Inspection Quantity: Full inspection.

Inspection method: visual inspection.

评论

发表评论

此博客中的热门博文

Connection construction methods for steel buildings

图片
  Connection construction methods for steel buildings The steel structure building connection construction mainly consists of three ways: rivet connection, welding, bolt connection. 1. Rivet connection Rivet connection refers to the connection method of inserting rivets into the rivet holes and then riveting the holes together by applying pressure or heating, and the internal part of the member is pressurized by the shear of the rivets. The advantages of riveting are reliable force transmission, good shape and toughness. The disadvantage is that the rivet processing and manufacturing of steel consumption, riveting procedures are complex, and processing and manufacturing labor-intensive, limited bearing capacity, in the rivet hole will produce strong stress. Rivet connection 2. Welding technology Welding is the most common connection form for basic steel structure components. Welding generally does not require splicing materials, saving steel and labor, saving materials; good sealing o
阅读全文

Key Points of Quality Control in Ball-Point Space Frame Project

图片
1. S pace F rame   E ngineering Q uality C ontrol P rocess 1.1. S pace frame   construction process 1.1.1. The process flow of space frame   components processing Raw material selection and inspection   →   cutting   →   grounding and welding   →   rust removal and coating   →   packaging, marking, storage and transportation. 1.1.2.S pace frame   installation and construction process Check the base structure and embedded parts → measure and set off → sort and stack the space frame   parts → test the compound size of the small unit on site → connect and install the support → install the lower chord, web and upper chord → check the first space frame → in order Carry out the installation and inspection of each space frame→installation of roof panels and gutters → overall inspection of the space frame→cleaning→acceptance→dismantling of scaffolding → completion. 1.2. Quality control process of space frame   construction Preparatory work before the start of construction (joint review of dra
阅读全文

Large span space frame building

图片
  Large span space frame buildings are a popular building design for structures that require open and flexible interior spaces, with minimal obstructions and maximum design possibilities. They are known for their unique structural form, which relies on a series of interconnected tubular steel or aluminum members to create a lightweight shell that spans large areas without requiring the need for internal supports. The concept of space frame construction was developed in the early 1900s by Alexander Graham Bell, who used the principle of tetrahedral geometry to create a lightweight and flexible design for constructing kite-like planes. Since then, space frame structures have been used for a wide range of applications, including automotive manufacturing plants, sports arenas, and airport terminals. One of the primary advantages of large span space frame buildings is the flexibility they offer in terms of design. The structural system can be adapted to meet various architectural configurat
阅读全文